View a structure using a configuration baseline

View a structure using a configuration baseline You can modify the revision rule to configure a structure with a configuration baseline and then view it. You can also use effectivity and variants for further analysis. Procedure Search for and open the structure. Modify a revision rule to include the configuration baseline in the structure. In the revision rule list, go to the rule that you want to modify and click Information. The revision rule details are displayed with all the clauses. On the Clauses section of the Revision Rule panel, click More > Add clause to add the clause to the configuration baseline. Perform one of the following tasks: If configuration baselines are created for multiple subassemblies and you want to configure the structure for all of the subassemblies that satisfy the clause you define, in the Clauses list, select Baseline Type and then select the Configuration Baseline Type, and a date. To analyze the structure for a specific configuration baseline, in the Clauses list, select Baseline Object and then add the required configuration baseline. Click Add to modify the selected revision rule. If required, add a new clause, delete a clause, or change the order of precedence by moving a clause up or down. Click Modify and Configure. The revision rule is modified and configured to display the content of the configuration baseline. If required, use effectivity and variants to further configure the structure. Engineering BOM Management ─ Usage, 2606 Unpublished work. © 2026 Siemens