Install design and BOM alignment using Deployment Center

Add the design and engineering BOM (Usage BOM or Assembly BOM) alignment application to your existing Teamcenter environment so that users can align designs and engineering BOM for BOM-driven mockups.

Prerequisites

• If Teamcenter is already set up, verify if Visualization Server is installed. If it is not installed, first ensure that the hardware and software requirements for Visualization Server Manager are met. Next, follow the instructions to setup Visualization Server.
• Deployment Center is setup. If not, plan its deployment.

Procedure

1. Log on to Deployment Center and select the environment to which you want to add the design and engineering BOM alignment.
2. Go to the Applications task.
3. Click Add or Remove Selected Applications.
4. In the Available Applications panel, use the web browser search to find the Design BOM Alignment Automation application. Select the application, and continue.
5. From the components list, note any remaining components whose configuration status is not 100%. Select each incomplete component, enter required parameters, and save component settings until all components in the environment show a configuration status of 100%. When all components are fully configured, the Deploy task is enabled.
6. Go to the Deploy task.
7. Click Generate Install Scripts to generate deployment scripts you will use to update affected machines.
8. When script generation is complete, note any special instructions in the Deploy Instructions panel.
9. Locate the deployment scripts, copy each script to its target machine, and then run each script on its target machine.

For more information about running deployment scripts, see Run the deployment scripts in the Deployment Center ─ Usage help. If you face any issues during the deployment, see Troubleshooting deployment in the Deployment Center ─ Usage help.