You can perform a Revise operation on a single requirement object under either of the following conditions:

• The selected requirement object is in a released state and the requirement structure is imprecise.
• The selected requirement object is in a released state, the BOMview revision (BVR) of the parent object is open, and the requirement structure is precise.

Note: The parent object is considered open under the following conditions:

• Not in a released state.
• In a released state but still modifiable.
• Not checked out by another user.
• Not locked by the access control list (ACL).

Example

The expanded requirement structure in Teamcenter shows the Req1/A;1–Task Reqts requirement is in a released state (locked) and the BOMview revision of the Spec1/A;1–Robot Reqts parent requirement specification is open (available for edit):

• Spec1/A;1–Robot Reqts
  • Spec1/A — Spec1/A-View BOMview revision is open — View
  • Req1/A;1–Task Reqts — object selected for Revise
    • Req1/A — Req1/A-View — Task Reqts — View
  • Req2/A;1–Extraneous Materials

When you export this requirement structure to Word and mark for Revise on the Req1/A;1–Task Reqts requirement, only the selected Req1/A;1–Task Reqts requirement is marked for Revise. After performing the Revise operation in Word, the revise symbol displays next to the Req1/A;1–Task Reqts requirement in the Requirements pane in Word:

• Spec1/A;1–Robot Reqts
  • Req1/A;1–Task Reqts
  • Req2/A;1–Extraneous Materials